The Stages And Equipment Used In The Cement Making Process IELTS Writing Task 1

In order to make cement, limestone and clay must first be crushed, and the resulting powder is then put through a mixer, as seen in the first diagram. The raw cement ingredients are then produced by passing the power through a revolving heater where heat is continuously supplied. Finally, the raw materials are transferred through a grinder machine to generate the cement. Following packaging, the cement is offered for sale.

Using cement to create concrete is demonstrated in the second diagram. Concrete is made of 15% cement, 10% water, 25% sand, and 50% small stones, sometimes known as "gravel," and is made using a simpler procedure than the creation of cement. Concrete is made by pouring the four components into a sizable mixer that rotates. As we can see, cement can be used in other less difficult processes, including the manufacture of concrete, after it has undergone a number of phases and the use of various tools.

First, raw materials like clay and limestone are combined to create cement after being crushed in a crusher. A great blend is produced by combining all of those ingredients. In addition, the mixture enters a heater that rotates. Heat is applied from the tube's end before the blend is actually dumped into the grinder, as it is in the rotating heating tube. The slurry subsequently transforms into cement after undergoing all of the systemic steps, and the cement is finally bagged.

Gravel, cement, water, sand, and a concrete mixer are the basic elements of construction systems required to produce concrete. The most important and necessary element is gravel or small stone, which makes up 50% of all the materials. However, there are some more components as well, such as sand, which is the second most common ingredient and is split in half from gravel, cement, and water. When compared to the other materials utilised to build a new actual construction, cement makes up 15% of the total. A concrete mixer is used to combine all the ingredients.

Overall, the processes involved in creating cement are more difficult and require sophisticated equipment. But the creation of concrete only entails mixing the necessary ingredients in the proper ratios using a simpler machine. While heat is needed to create cement, no heat penetration is needed while generating concrete during the mixing process.

Clay and limestone are two of the raw materials used in the production of cement. These raw materials are crushed to a fine powder in a crusher at the beginning of the production process in predetermined amounts. This is then brought to a mixer, and the properly combined powder is then sent down through airtight tubes to a continuously spinning heater. At the same time, heat flames are continuously visible from its lower part.

To create cement, a second grinding step is performed on the heated slurry in a grinder. This cement is finally distributed after being bagged.

The ingredients are introduced to the large roller in a certain ratio in order to produce concrete with the greatest consistency. The giant roller then rotates counterclockwise to thoroughly mix the ingredients. 50% gravel, 25% sand, 15% cement, and 10% water make up the basic ingredients.