Diagram shows the Process of the Water Treatment IELTS Academic Writing Task 1

First, water is flowing into pipes via associated pumps during the water filtration process after passing past intake screens. After that, water is added to the flash mix, which was created using oxidants and polyaluminum chloride. The first three stages cover the entire project. Water must flow through a coagulation process and settling basin in the fourth and fifth processes. Settling basins keep all the rocks and dirt away from the water. It reduces the later filtration process. Following completion of steps four and five, water must next pass through a filter membrane and chlorine. Before being subjected to the chlorine, lime, or (sodium hydroxide), and fluoride disinfection process. The process of disinfection takes a lot of attention. Water news to be pured before consumption. While disinfecting it takes away all the toxins that might be present. Eight stages of the water purification process were completed with this approach. For daily use, water must be pumped through the final two stages and into the faucet.

This flash mix takes a quick short time. After the flash mix the process of flocculation is done. Moving forward to the settling basin process, The dirt and rocks are settled down. This makes the water less disinfected. The water becomes somewhat clean. Then the water is passed forward with chlorine. The next procedure comes from settling membranes. The water is passed through a settling membrane. This further purifies the water. Prior to going through the chlorination, lime, or (sodium hydroxide), as well as fluoridation processes. Disinfection requires a great deal of focus. Water must be filtered before use. It eliminates all potentially present contaminants while disinfecting. With this method, the eight steps of the water purification procedure were finished. Water must always be pumped through into the final two steps and into the tap in order to be used regularly. The water is purified and is no more harmful to the health of the consumers.

The water is then advanced while containing chlorine. The following process uses membranes for settling. A membrane used for settling is used to process the water. Thus, the water is much more purified. Before undergoing the fluoridation, lime, or sodium hydroxide procedures, as well as chlorination. Disinfection calls for intense concentration. Before use, water must be filtered. While disinfecting, it removes all potentially present pollutants. The eight steps of the water purification process were completed using this method. To be frequently utilized, water must always be pumped through the last two processes and into the tap. The water has been cleaned, making it no longer hazardous to consumers' health.